Products Description
The product has the traits of excessive strength, low elongation, excessive temperature resistance, excessive modulus, mild weight, right toughness, corrosion resistance, lengthy life, etc. It can be broadly used in the fields of ancient cement pavement, renovation of airport runways, dams, river banks, slope protection, avenue and bridge pavement reinforcement treatment.
it can make stronger and beef up the pavement to stop avenue floor fatigue cracks, warm and bloodless growth cracks and reflections beneath Cracks, and can disperse the bearing stress of the pavement, lengthen the carrier lifestyles of the pavement, excessive tensile power and low elongation, no long-term creep, top bodily and chemical stability, correct thermal stability, fatigue cracking resistance, excessive temperature rut resistance, low temperature shrinkage resistance Crack, extend to decrease reflection cracks.
![]() | ![]() | ![]() | ![]() |
|
![]() | ![]() | ![]() | ![]() |
1. Old asphalt concrete pavement, strengthened asphalt floor layer to stop street floor collapse.
2. Reconstruct the cement concrete pavement into a composite pavement to suppress reflection cracks induced by means of plate shrinkage.
3. Road extension task to stop cracks brought on by way of uneven joint between new and ancient and uneven settlement.
4. Reinforcement therapy of tender soil basis is conducive to water drainage and consolidation of gentle soil, efficiently suppresses settlement, uniform stress distribution, and enhances the typical power of subgrade.
5. Shrinkage cracks are generated on the semi-steel base of newly-built roads, and strengthened reinforcement prevents pavement cracks induced by means of reflection of basis cracks
Item Spec | JBGS 3030 | JBGS 5050 | JBGS 8080 | JBGS 100100 | JBGS 120120 | JBGS 150150 | JBGS 200200 | JBGS 300300 | JBGS 6030 | JBGS 8030 | JBGS 10030 | JBGS 12030 | JBGS 15030 | JBGS 20030 | JBGS 40050 | |
Tensile strength ≥KN/m | weft | 30 | 50 | 80 | 100 | 120 | 150 | 200 | 300 | 60 | 80 | 100 | 120 | 150 | 200 | 400 |
Warp | 30 | 50 | 80 | 100 | 120 | 150 | 200 | 300 | 30 | 30 | 30 | 30 | 30 | 30 | 50 | |
Elongation ≤ | 13% | |||||||||||||||
Mesh size(mm) | 25.4×25.4 or50.8x50.8 or 76.2x76.2 |